Frictional Games Forum (read-only)
simply stuck - Printable Version

+- Frictional Games Forum (read-only) (https://www.frictionalgames.com/forum)
+-- Forum: Penumbra: Overture, Black Plague & Requiem (https://www.frictionalgames.com/forum/forum-5.html)
+--- Forum: Hints, help and spoilers (https://www.frictionalgames.com/forum/forum-21.html)
+--- Thread: simply stuck (/thread-842.html)

Pages: 1 2


simply stuck - pikacz - 04-06-2007

hi guys
Spoiler below!
i've been everywhere - in excavation and saw a tunnel on the ceiling, the storage is closed, then i took a saw from the tool shed and used it on the wooden plank blocking the door, i went to iron mines and connected the cable but the machine doesn't work.
what next? Tongue


RE: simply stuck - Jojje - 04-06-2007

Spoiler below!
You need to get the ignition key and some gasoline from the storage.



RE: simply stuck - Thaliur - 04-06-2007

Spoiler below!
To get to the storage room, you have to crawl through the ceiling tunnel. You can get there using the broken ladder, some boxes and the "altar" platform,
In the storage room ("the place where things are kept") you will find a key and "the juice" (gas) which you can "feed" to the "metal monster" Wink



RE: simply stuck - pikacz - 04-06-2007

ok, i got both items. how do i use the gasoline, the lid is stuck


RE: simply stuck - Thaliur - 04-06-2007

Spoiler below!
You can force the can open when you use your hammer on it



RE: simply stuck - pikacz - 04-06-2007

where exactly is the lid?

[Image: 4de5kcg.jpg]


RE: simply stuck - sin`pl - 04-06-2007

go to inventory and 'mix' gas with hammer.


RE: simply stuck - pikacz - 04-06-2007

loool, i thought i was supposed to break the lid somewhere on the machine Tongue thx


RE: simply stuck - stAtic15 - 04-06-2007

Yepp, common mistake. Smile


RE: simply stuck - Willbreaker - 04-06-2007

pikacz Wrote:loool, i thought i was supposed to break the lid somewhere on the machine Tongue thx

I did the same thing, seems like they were quite vague on the description.
Turns out the lid was stuck on the gas can, not the machine!

/Breaker