Amfp Same sounds ?

[DnALANGE]

This is way too difficult to explane..
You will need to open the.mat file for the plane you use,
Then you need to open your materials.cfg And copy\paste for example this :

PHP Code: (Select All)

<Materials>    
    <Material
        Name = "Concrete"
        Elasticity = "0.1"
        KineticFriction = "0.35"
        StaticFriction = "0.35"
        
        Priority="0"
        
        ElasticityMode = "Average"
        FrictionMode = "Average"
        
        StepType="tarmac"
        
        MinScrapeSpeed = "1"
        MinScrapeFreq = "0.9"
        MinScrapeFreqSpeed = "1.2"
        MaxScrapeFreq = "1.1"
        MaxScrapeFreqSpeed = "2.2"
        MiddleScrapeSpeed = "2"
        MinScrapeContacts = "3"
        ScrapeSoundName = "step_Walk_Tarmac"
    >    
        <Impact  MinSpeed="2" SoundName="wettarmac_1"/>
        <Impact  MinSpeed="2" SoundName="wettarmac_2"/>
        <Impact  MinSpeed="2" SoundName="wettarmac_4"/>
        <Impact  MinSpeed="2" SoundName="wettarmac_5"/>
        <Impact  MinSpeed="2" SoundName="wettarmac_7"/>
        <Impact  MinSpeed="2" SoundName="wettarmac_8"/>
        <Impact  MinSpeed="2" SoundName="wettarmac_9"/>
        <Impact  MinSpeed="2" SoundName="wettarmac_10"/>
        
        <Hit  MinSpeed="3" SoundName="" PSName="ps_hit_hard" PSPrio="10" />
        <Hit  MinSpeed="1" SoundName=""  PSName="ps_hit_hard" PSPrio="10" />
    </Material> 


Then...
Change this name -> Name = "Concrete" into whatever Name = "MyNewConcrete" or whatever you want,
Then the Name = "MyNewConcrete" need to be replaced into the .mat file your plane uses..
ALso there are 8 defferent stepsounds in the example above.
SO <Impact MinSpeed="2" SoundName="wettarmac_1"/>
Need be changed as well (wettarmac_1) <-- Is the soundfile in your mod\folder.
---
As i said, VERY hard... THis is NOT for beginners.
If you want to try, try like mine, and COPY THE ORIGINAL FILES as backup.
Good luck.