Graphics problem

[plutomaniac]

So you do have an AMD card, that's promising I have to say. Can you attach me the HPL.log file again to see if the game detects the AMD one?

If you get the error "Renderer #0 could not be initialized", try launching the game the default 1024x768 resolution with full screen off. If this works, the most likely cause is that you run out of graphics memory when using higher resolutions. This might be that there is some background application or similar using resources or that simply the graphics card does not have enough. There are two ways to fix this:

1) Enter Display Properties and make sure that the desktop color depth is 32.

2a) Run at lower resolution. Even if you have an LCD screen, there should be no problem running at a resolution such as 1280x768 and have the game still look good. This is probably the best solution to this problem.

2b) Make sure that SSAO and EdgeSmooth are turned off. These two effects use up a lot of graphics memory and turning them off should help a lot.

3) Make sure that you have only a single display set in the graphic card's control panel.

Note that sometimes doing both 2 a and b are needed!